# \*\*\*Guide\*\*\*Advance-level Tailscale Setup on Unraid {Part B}

**URL:** <https://forum.hhf.technology/t/guide-advance-level-tailscale-setup-on-unraid-part-b/201>\
**Category:** Resources\
**Tags:** unraid, tailscale\
**Created:** [June 20, 2024, 6:35pm UTC](https://forum.hhf.technology/t/guide-advance-level-tailscale-setup-on-unraid-part-b/201 "2024-06-20T18:35:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![hhf.technoloy](https://forum.hhf.technology/user_avatar/forum.hhf.technology/hhf.technoloy/32/68_2.png) [@hhf.technoloy](https://forum.hhf.technology/u/hhf.technoloy)\
**Post date:** [June 20, 2024, 6:35pm UTC](https://forum.hhf.technology/t/guide-advance-level-tailscale-setup-on-unraid-part-b/201/1 "2024-06-20T18:35:00Z")

</div>

## Advanced Tailscale Settings

## Log in to Tailscale Settings

1. Log in to the Unraid server and switch to the **Settings** tab.

2. Click on **Tailscale**.  

3. On the **Tailscale** tab, click the **Viewing** button.

4. Click **Sign in to confirm identity**

5. A new window will open. Click **Viewing** in this window, then **Sign in to confirm identity**.

6. Log in to Tailscale. Click **Close window** to return to the Tailscale settings once you have logged in.

## Subnet Router

1. Click **Subnet router**.

2. Enter the desired routes and click **Advertise routes**.

3. The routes will be displayed with a **Pending approval** message. The routes must be approved in the Tailscale admin console before they can be used.

4. Open the [Tailscale admin console](https://login.tailscale.com/admin/machines).

5. Locate the server in the machine list. It will have a blue **Subnets** badge with an exclamation point indicating that the server has routes that have not yet been approved.

6. Click the three dots at the end of the row, then **Edit route settings…**.

7. Check the routes to approve and save.

## Exit Node

1. Click the down arrow under **EXIT NODE**.

2. Select **Run as exit node**.

3. The server will now advertise itself as an exit node. This must be approved in the Tailscale admin console before it can be used.

4. Open the [Tailscale admin console](https://login.tailscale.com/admin/machines).

5. Locate the server in the machine list. It will have a blue **Exit Node** badge with an exclamation point indicating that the server has not yet been approved as an exit node.

6. Click the three dots at the end of the row, then **Edit route settings…**.  

7. Check **Use as exit node** and save.